Glock 26 Gen 5 Carry Starts with the Right Holster
Glock 26 Gen 5 Carry Starts with the Right Holster
Quick answer: For a Glock 26 Gen 5, start with a holster that names Gen5 explicitly. MyHolster has a right-hand leather IWB listing with that designation. Other Glock 26 listings offer OWB and left-hand choices, but their titles do not confirm generation. Check those before ordering, especially with an optic, taller sights or another accessory.
A short grip can help hide a pistol under a shirt. It cannot tell you whether a holster clears the controls, stays attached to your belt or leaves room for your hand. Each deserves a look before you order.
This guide uses manufacturer model information and MyHolster product titles, SKUs and variant availability checked November 11, 2026. It is a catalog review, not a hands-on fit test. Where a listing leaves a question open, the table says so.
Identify your G26 before choosing the carry position
Read the model designation on your firearm and original paperwork. Write down the generation, whether the slide is MOS, the installed optic and any changes to the sights or exterior. A photo of the actual setup is more useful than calling it a “Baby Glock.”
GLOCK lists the standard Gen5 as a 9x19 mm subcompact with a 3.43-inch barrel, 6.42-inch overall length, 1.30-inch overall width and 4.17-inch height with magazine. Standard magazine capacity is 10. These figures help describe the pistol; they are not holster tolerances. See the GLOCK G26 Gen5 specifications.
The Gen5 removes the finger grooves and uses ambidextrous slide-stop controls. GLOCK also describes its Marksman Barrel and front serrations. For holster shopping, external clearance matters more than the barrel's marketing description. Pay attention to the controls and the area around the trigger guard.
Gen3, Gen4, Gen5 and MOS are not interchangeable labels
MyHolster carries separate Gen3, Gen4 and Gen5-named IWB listings. That is a reason to select carefully, even if their photographs look similar. A general Glock 26 title does not identify which generation was used to establish fit.
MOS identifies an optics-mounting configuration. It does not mean an installed red dot will clear every holster. GLOCK's G26 Gen5 MOS model page describes the mounting provision. The optic's housing, plate and sight height still need their own clearance check.
You may also encounter G26 V listings while shopping. Keep that designation separate in your order notes. None of the four holsters below explicitly names G26 V, so this article does not extend their catalog fit claims to it.
Four MyHolster listings, with the fit evidence shown
Every product below names Glock 26 in its title. Only the first names Gen5. “Available” refers to the variant response on the review date, not a promise about future stock. SKUs identify the checked variants; they are not unique firearm-fit certificates.
| Listing and carry format | Available variant / SKU | What is verified |
|---|---|---|
| Glock 26 Gen5 right-hand leather IWB holster | Black: IC6124_CO_BL | Title explicitly names Gen5 and right hand. Optic and accessory clearance unconfirmed. |
| Glock 26 right-hand open-top leather OWB holster | Black: 17MYH105OT_BL; Brown: 17MYH105OT_BR | Title names G26 and right hand. Generation is unspecified; confirm Gen5. |
| Glock 26 right-hand thumb-break leather OWB holster | Brown: 17MYH105LP_BR | Title names G26 and right hand. Confirm Gen5 and strap clearance. |
| Glock 26 left-hand leather IWB holster | Black: IC5124_LG_BL_LH; Brown: IC6124_LG_BR_LH | Title names G26 and left hand. Generation unspecified. Sand variant unavailable. |
For a right-handed owner of a standard Gen5, the explicitly named IWB listing gives the clearest catalog match. For OWB or left-hand carry, ask MyHolster to confirm the exact generation and configuration against the selected SKU before purchase. Do not treat the broader rows as independently tested Gen5 fits.

Choose IWB or OWB around your everyday clothing
IWB places the holster inside the waistband. Leave room for both the pistol and leather rather than tightening your belt until pressure becomes uncomfortable. Check the clip with your actual belt and trousers. A compact pistol still needs stable support.
Try your normal seated position before deciding on placement. The holster mouth should stay accessible, the grip should allow a secure hold and the setup should not shift when you stand. This is an unloaded fitting exercise, with ammunition removed from the area.
OWB moves the holster outside the waistband. It avoids adding the holster body inside your trousers, but the cover garment must reach far enough and stay over the setup during ordinary movement. The open-top and thumb-break options in the table solve different closure preferences.

An open top leaves no retention strap to release. A thumb break adds a closure that must clear the firearm correctly and work with your hand. Neither the presence of a strap nor the product name establishes a formal retention level. This review assigns no duty-retention rating.

Before you buy: Send the generation, draw hand, optic name, sight changes and any mounted accessory with the product SKU. Ask about belt compatibility too. A clear answer about your exact setup is more useful than a general statement that a holster fits Glocks.
What the product photographs can tell you
The photographs show construction and general shape. They do not document a Gen5 fit test. The blue demonstration pistols in the OWB images should not be used to identify a generation or prove optic clearance.
The Gen5 IWB listing shares its main image across many differently named firearm listings. Its SKU also appears elsewhere in the catalog. The other featured products have shared SKUs too. These patterns limit what can be inferred from a photo or code alone; they do not establish cross-model compatibility.
None of these images is verified as Matt's own photography. They appear to be supplier catalog photos or composites. The IWB image shows several colors, but the checked Gen5 variant is black. Choose the available variant from the table rather than assuming every pictured color can be ordered.
Inspect the delivered holster before carrying
With the firearm unloaded and ammunition elsewhere, check that the pistol seats without forced pressure, the trigger guard is covered and no material enters the trigger area. Look for interference around controls, sights and the slide. Stop if the fit needs cutting, heating or aggressive stretching.
Check that the belt attachment holds the holster in place as the unloaded pistol is removed. For a thumb break, confirm the closure works without pressing a control or obstructing the grip. If the mouth collapses, remove the holster before reinserting the unloaded firearm. Ask for help with any uncertain fit before carrying.
Glock 26 Gen 5 questions
Is the Glock 26 Gen 5 a good gun?
That depends on your needs and hands. GLOCK's model page establishes its dimensions and configuration, not how well you will shoot it. Try the grip and controls in person if possible. This catalog review makes no claim from personal range testing.
Is the Glock 26 Gen 5 discontinued?
A live Gen5 page does not establish current commercial production. GLOCK still exposes Gen5 and Gen5 MOS information in its law-enforcement catalog at the review date. Ask GLOCK or an authorized dealer about current supply. For an existing pistol, choose the holster by its actual designation.
Why did they discontinue the Glock 26?
The question assumes the whole model family ended. The maker's catalog also contains a G26 V MOS designation, so that premise is too broad. A specific generation's production status needs separate confirmation; it does not determine whether a holster fits a firearm you already own.
Is a Glock 26 a good carry gun?
Its short grip may suit your concealment needs, but comfort and control need an individual check. Fit the unloaded pistol and holster with your usual belt and clothing. Verify generation, handedness, secure attachment and trigger coverage before deciding the setup works for you.