Glock 17 Holster Fit Starts With the Generation
Glock 17 Holster Fit Starts With the Generation
Quick answer. Match a Glock 17 holster to the generation and version on your paperwork. Then check the hand, belt attachment, and clearance for anything mounted on the pistol. MyHolster lists an OWB leather thumb-break for Gen 1 through Gen 5, a Gen4 leather pancake, a left-hand Gen5 MOS nylon IWB, and a right-hand Gen6 leather holster with snap loops. The fit table shows the available variants and where to ask for more detail.
Which Glock 17 do you have?
Start with the case label or original paperwork. Write down the full model, including any suffix and generation. Search results often shorten Glock 17 Gen5 MOS to Glock 17, which makes two separate listings look interchangeable. Keep the full name on hand while you compare the product titles. If the label is missing or unclear, have Glock or a qualified dealer identify the version before placing an order.
Glock's generation history lists the early G17 frames without a mounting rail and the Gen3 and Gen4 frames with one. It also records an ambidextrous slide stop on Gen5. Those details offer context for why a holster maker might list generations separately. The fit statement for the specific accessory still matters, especially where molded material sits close to the frame. Glock's G17 generation history.
Gen5 MOS and Gen6 labels
Keep MOS in the model name when comparing Gen5 listings. It identifies an optics-ready version. A title that names MOS establishes the version the seller lists, while the clearance needed by an installed optic depends on the optic and holster. Send the seller the exact optic name if the listing leaves that detail open.
Glock lists the full-size G17 Gen6 in its sixth-generation lineup and describes a revised frame and optics-ready system. For an older holster with a stated Gen 1–5 range, stop at Gen5 unless the maker extends that fit for the exact item. The G17 V and long-slide G17L have their own model names. Keep the suffix in the fit request and look for an explicit match. Glock's Gen6 announcement.
MyHolster Glock 17 listings by generation
The rows below reflect product titles and Shopify variant records checked November 20, 2026. Availability applies to the choices shown and can change. We matched listings and variants from the catalog. We did not bench-test these holsters. If you're comparing two colors or hands, check the selector after you choose each option. The available choice can change on the same page.
| Listed fit | Product and style | Available choices and SKUs |
|---|---|---|
| Glock 17 Gen 1–5 | Gen 1–5 leather OWB thumb-break holster | Left, brown (65MYH105LP_BR_LF) or black (65MYH105LP_BL_LF). Left black combo (65MYH105LP_COMBO_LH). Right-hand options were unavailable. |
| Glock 17 Gen4 | Gen4 open-top leather OWB pancake holster | Right, black (50MYH125OT_BL) or brown (50MYH125OT_BR). |
| Glock 17 Gen5 MOS | Gen5 MOS left-hand black nylon IWB holster | Left, black (SARAC6_7_LH). |
| Glock 17 Gen6 | Gen6 right-hand leather OWB holster with snap loops | Right, black (MASC109_XD_BL) or brown (MASC109_XD_BR). |
What the attachments look like
Thread-through slots and a thumb-break strap

The Gen 1–5 leather thumb-break listing shows a strap over the opening. The pictured configuration illustrates the style. Use the hand and color in the product selector to identify the item you would receive. A right-hand photo can appear in a listing where the in-stock choice is left-hand.
Open-top leather pancake

The Gen4 pancake listing uses an open top and widely spaced belt slots. With thread-through slots, the belt passes through the holster. Check the width of your belt against the maximum stated for the product. If the listing leaves the slot measurements blank, give the seller both your belt width and thickness.
Left-hand nylon with a clip

The black nylon Gen5 MOS listing is marked left-hand IWB. The clip is visible in the catalog photo. If a second listing looks the same, compare the hand in its title and the selected SKU. Nylon and molded leather feel different, and that difference alone says little about the clearances around a particular optic, sight, or light.
Leather with snap belt loops

The Gen6 leather listing uses loops with snaps, a visibly different attachment from the cut-through slots on the Gen4 pancake. Check the product title for the Gen6 label even if the photos on a Gen5 page look familiar. MyHolster uses the same style SKUs across some generation-specific pages, including the nylon IWB and snap-loop leather families. Use the named fit on each page when the photos or SKUs match. These catalog images illustrate the holsters and their hardware. The exact generation of any display insert hasn't been independently verified.
Clearance questions to settle before checkout
IWB means inside the waistband, and OWB means outside the waistband. A paddle, belt slot, clip, and snap loop describe the attachment. An open top or thumb-break describes the opening. Product pages sometimes group all of these words together. Read the attachment and opening details separately, then compare the listings that name your model and hand.
Accessory clearance depends on the specific configuration. A taller front sight can need more room along the sight channel, an installed optic can occupy space over the holster opening, and a rail-mounted light changes the profile the holster has to accommodate. The listings in the table establish the named pistol fit. Ask about your exact accessory if the seller hasn't listed it. Ask again if the accessory model changes.
What to send in a fit question. Include the full pistol model and generation, any suffix, the mounted accessory names, the hand you need, and your belt width. Copy the exact holster URL and variant SKU. That gives support enough information to distinguish two nearly identical pages and answer for the product in your cart.
When a listing names more than one Glock model
Some catalog titles group the G17 with the G19 or with other Glock models. Read the whole fit line, including any generation limits. If a listing names both pistols, that is a fit claim for that specific holster. For an existing holster with an unreadable label, look for the maker name and any number stamped on the back. Send those details along with a photo of the empty holster and ask the maker to identify it. The shape of the opening in a product photo gives you very little to go on.
Glock 17 holster FAQs
What's the best holster for a Glock 17?
Start with a listing that names your generation and version, then check the hand and belt attachment. If you have an optic or light fitted, confirm its clearance for that exact holster. The right choice depends on the combination of those details.
Is a Glock 17 too big for concealed carry?
The G17 is a full-size model. For a holster purchase, ask for the holster's actual dimensions and compare them with the space available in your clothing or equipment. An IWB label tells you where the accessory sits and gives no measurement of its bulk.
What is the best holster for a Glock 17 Gen 6?
Begin with a listing that expressly names Gen6. One example in the table is the right-hand leather OWB model with snap belt loops. Match the attachment to your belt and confirm the clearance separately if an optic or light is installed.
Will a Gen 6 Glock 17 fit in a Gen 5 holster?
Ask the holster maker about the exact product and configuration. A listing that ends at Gen5 gives you a defined fit range. Use a Gen6 listing or get written confirmation for your existing holster before counting on a shared fit.