Glock 31 Fit Starts With the Generation and Draw Hand
Glock 31 Fit Starts With the Generation and Draw Hand
Quick answer: A Glock 31 holster should name your pistol and, where specified, its generation. MyHolster has in-stock Gen3 left-hand nylon, Gen4 nylon, Gen4 right-hand leather OWB, and generation-unspecified leather IWB listings. Match the draw hand and attachment before ordering. Similar dimensions, a shared SKU, or a familiar-looking product photo do not establish compatibility with another model, an optic, or a weapon light.
The G31 is the full-size .357 SIG model. That identifies the firearm family, but it leaves several buying decisions open. This guide separates GLOCK's published specifications from MyHolster's listing claims, then shows which available products actually name the G31. Catalog and stock checks were completed November 16, 2026. We have not physically tested these combinations.
Start with the G31 generation on your pistol
GLOCK publishes separate pages for the standard G31 and G31 Gen4. Both specify a 114 mm (4.49-inch) barrel, a standard 15-round magazine, a 186 mm slide, and 32 mm overall width. Those shared measurements explain why a broad size description can sound convincing. They still do not certify a particular holster.
The standard G31 specification page lists overall length as 204 mm (8.03 inches). The G31 Gen4 specification page lists 202 mm (7.95 inches) and describes modular backstraps and a reversible magazine catch. The 186 mm figure is slide length, not overall length. Check which measurement a review is quoting.
MyHolster uses “Gen3” and “Gen4” in individual product titles. GLOCK's standard page does not label its heading “Gen3,” so use the markings and paperwork for your own pistol rather than treating that webpage heading as a generation certificate. If you cannot identify the generation, send the model information before ordering.
Neither of the two GLOCK pages above establishes a G31 Gen5 or factory MOS version. A retailer's title containing those words is insufficient evidence. For a modified slide, describe the actual optic, sight height, and any other changes instead of relying on a generation nickname.
Verified Glock 31 listings and available variants
The table records title-backed fit claims and live variant availability. “Available” means the product's Shopify variant returned available at the check; it is not a hands-on fit result. Each row keeps its stated generation boundary. A G31-only title needs confirmation if you want an explicit Gen3 or Gen4 assurance.
| Model named and product | Attachment and hand | Available SKU / variant |
|---|---|---|
| Glock 31 Gen4 black nylon IWB holster | Metal belt clip; draw hand not stated in title | SARAC6_7; single default variant available |
| Glock 31 Gen3 left-hand nylon IWB holster | Metal belt clip; left hand | SARAC6_7_LH; single default variant available |
| Glock 31 Gen4 leather OWB holster with snap belt loops | Snap belt loops; right hand | MASC109_XD_BL black and MASC109_XD_BR brown available |
| Glock 31 ambidextrous leather IWB holster | Clip and belt-slot design; description states ambidextrous | IC5146_LG_BL Black available; IC6146_LG_BR also available under “Default Title” |
The last row's second variant has an unclear display label. Confirm its color before selecting it; the SKU suffix alone is not a substitute for a correctly labeled option. The explicitly labeled Black variant provides a clearer order reference.
Choose the attachment around how you dress
Nylon IWB: confirm the clip and draw hand
An inside-the-waistband holster places the pouch inside your trousers, leaving its attachment outside. Allow room for the holster as well as the pistol. Before committing, check that the clip suits your belt and that the grip remains accessible when seated. These listings do not establish an exact belt-width limit, so ask for that measurement if your belt is unusually wide or thick.

The empty nylon-holster view shows the clip without asking you to identify the demonstration pistol. For a left-handed Gen3 owner, the table includes an explicitly left-hand listing. The Gen4 black nylon title does not state handedness; confirm it before purchase. A reversible magazine catch on the firearm does not make a holster ambidextrous.
Leather OWB: snap loops are a specific attachment
The Gen4 leather OWB row names right-hand draw and snap belt loops. Choose it if those details match your intended setup. Outside-the-waistband placement also needs enough cover-garment room if concealment is your goal. Check the actual belt-loop dimensions rather than assuming every snap-loop product fits the same belt.

This brown gallery image illustrates the loop arrangement. The blue demonstration pistol is visibly a different design; it is not a G31 fit-test photograph. Black and brown variants were both available, but the product title and SKU are the catalog evidence for this row.
Ambidextrous leather: read the configuration carefully
The generation-unspecified leather IWB listing describes ambidextrous use and shows a clip-and-slot arrangement. Ask which configuration applies to your draw side and carry position. An ambidextrous description does not prove every attachment orientation works equally well, and it does not extend the listing to other Glock models.

The supplier's black-holster image shows the clip side. The handgun in that photo is not presented as a G31. Use this view to understand the construction, then confirm the exact pistol configuration separately.
What shared photos and SKUs can actually tell you
Several G31 generation listings share supplier codes. For example, the catalog's Gen3 and Gen4 nylon IWB products use SARAC6_7, while the corresponding left-hand products use SARAC6_7_LH. Other model listings can also share these codes. That helps identify a product family, but it cannot prove identical molding or universal fit.
The illustrated galleries appear to be supplier catalog photographs. None is verified as Matt's own photo, and demonstration guns differ across the galleries. We selected construction views rather than suggesting those guns document a G31 fit. Photo origin cannot be established from appearance alone.
Send these details for a useful fit confirmation: Glock 31 generation, right- or left-hand draw, optic and sight setup, any light or laser, and the product SKU. For the attachment, include belt width and thickness. Ask for confirmation of your complete configuration.
Check the complete setup before carrying
A light or laser changes the space the holster must accommodate. None of the four rows explicitly verifies a particular light or optic. A rail on the pistol does not establish light-bearing holster compatibility. Tall sights, threaded barrels, slide-mounted optics, and aftermarket controls also need individual clearance checks.
For an initial fit check, unload the firearm according to its manual and keep ammunition away from the checking area. The pistol should seat without forcing, the trigger should remain covered, and the attachment should remain secure. Stop if a strap presses a control, the pouch obstructs seating, or the holster shifts on the belt.
Do not assign a duty retention level from a thumb strap, material choice, or product photograph. Likewise, a soft pouch that closes when empty needs a different reholstering assessment from a rigid opening. Ask the supplier for its instructions rather than pushing the firearm into an obstructed pouch.
Some competing guides also suggest chest, drop-leg, paddle, or off-body options. Those are separate setups requiring their own G31 confirmation and attachment checks. The table makes no compatibility claim for them. Shooting accuracy, recoil, ammunition selection, and reliability require evidence beyond a holster catalog; this article does not claim a range test.
Glock 31 questions owners ask
What caliber is a Glock 31?
The Glock 31 is chambered in .357 SIG. GLOCK identifies that chambering on both model pages linked above. Do not confuse it with .357 Magnum or treat the shared number as ammunition compatibility.
Is the Glock 31 rare?
We have not established production totals or current firearm-market availability. An unavailable gun at one retailer would not establish rarity. GLOCK maintains G31 specification pages, while the stock checks here concern holsters, not pistols.
What's the difference between a Glock 31 and a Glock 32?
The G31 is the standard-size .357 SIG model; GLOCK identifies the G32 as the compact .357 SIG model. That size distinction does not establish shared holster fit. Select the model actually named by the listing.
Is a Glock 31 a good gun?
That depends on the condition of the individual pistol and your needs. This is a catalog-based holster guide, not a reliability or shooting evaluation. For holster selection, verify generation, draw hand, secure attachment, and clearance for your actual setup.